| 1 - RATING | Voltage / Current | 30 / 0.5 | DC V / A | |
| 2 - OPERATING TEMPERATURE RANGE | Operating Temperature | -20 to 70 | C | |
| 2 - PRESERVATIVE TEMPERATURE RANGE | Storage Temperature | 15 to 35 | C | |
| 3 - ELECTRICAL PERFORMANCE | Contact Resistance | 70 | m (max) | 100mA DC, 5V DC |
| 3 - ELECTRICAL PERFORMANCE | Insulation Resistance | 100 | M (min) | 250V DC |
| 3 - ELECTRICAL PERFORMANCE | Dielectric Strength | 250 | V AC (for 1 min) | Between terminals and frame |
| 4 - MECHANICAL PERFORMANCE | Insertion and Extraction Force | 3 - 30 | N | |
| 4 - MECHANICAL PERFORMANCE | Terminal Strength | 10 | N (1000gf) (for 60 sec) | Static load in any direction |
| 4 - MECHANICAL PERFORMANCE | Standard Atmospheric Conditions | 15 to 35 | C | Ambient Temperature |
| 4 - MECHANICAL PERFORMANCE | Standard Atmospheric Conditions | 25 to 75 | %RH | Relative Humidity |
| 4 - MECHANICAL PERFORMANCE | Standard Atmospheric Conditions | 80 to 106 | Kpa | Air Pressure |
| 5 - DURABILITY | Solderability - Wetting Time | 3 | Sec (or less) | 2205C for 30.5 sec |
| 5 - DURABILITY | Solderability - Area | 90 | % (over) | |
| 5 - DURABILITY | Soldering - Wave | 2605 | C (for 3 sec) | |
| 5 - DURABILITY | Soldering - Hand | 380 | C (or below, for 3 sec) | |
| 5 - DURABILITY | Life Test | 5000 | Cycles | Actuator speed 30 cycles/min |
| 5 - DURABILITY | Heat Test | 852 | C (for 48 hours) | Keep in normal condition for 30 min after test |
| 5 - DURABILITY | Humidity Test | 402C, 90-96%RH (for 48 hours) | Keep in normal condition for 30 min after test |
| 5 - DURABILITY | Cold Test | -402 | C (for 48 hours) | Keep in normal condition for 30 min after test |
| 5 - DURABILITY | Salt Spray Test | 5% NaCl liquor (for 24 hours) | Wash and keep in normal condition for 30 min after test |
| 6 - APPLICATION NOTES | Soldering | Avoid dipping rosin/insulating/caustic materials into the rocket. | | |
| 6 - APPLICATION NOTES | Cleaning | Do not blow with air gun or clean with solvent after soldering. | | |
| 6 - APPLICATION NOTES | Dissolving | Do not dissolve any part before soldering. | | |
| 6 - APPLICATION NOTES | Storage | Avoid high temperature, high humidity, and corrosive gases. | | |
| 6 - APPLICATION NOTES | Shelf Life | 180 | Days | Since goods were sent out from factory. |
