| 1 - Rating | N/A | DC30V 0.5A | V / A |
| 2 - Operating Temperature Range | N/A | -20C ~ 70C | C |
| 2 - Preservative Temperature Range | N/A | 15C ~ 35C | C |
| 3A - Dielectric Strength (Between Terminals) | 250V AC for 1 min | N/A | V AC |
| 3B - Dielectric Strength (Between Terminals and Frame) | 250V AC for 1 min | N/A | V AC |
| 3A - Contact Resistance | 0.1A DC5V | < 30 | m |
| 3B - Insulation Resistance (Between Terminals) | 250V DC for 1 min | 100 | M |
| 3B - Insulation Resistance (Between Terminals and Frame) | 250V DC for 1 min | 100 | M |
| 4A - Insertion and Extraction Force | Across spring piece and matching plug | 3 - 30 | N |
| 4B - Terminal Strength | 10 N (1000gf) static load for 60 sec in any direction | Without damage or excessive looseness | N / gf / sec |
| 4C - Atmospheric Conditions (Ambient Temperature) | N/A | 15C ~ 35C | C |
| 4C - Atmospheric Conditions (Relative Humidity) | N/A | 25% ~ 75% RH | % RH |
| 4C - Atmospheric Conditions (Air Pressure) | N/A | 80Kpa ~ 106Kpa | Kpa |
| 5 - Durability (Cycles) | Actuator subjected to 5000 cycles at 30 cycles/min | 5000 | Cycles |
| 5 - Heat Test (After Durability) | 852C for 96 hours, then normal condition for 60 min | Electrical characteristics shall be satisfied | C / hours |
| 5 - Humidity Test (After Durability) | 402C, 90-96% RH for 96 hours, then normal condition for 60 min | Electrical characteristics shall be satisfied | C / % RH / hours |
| 5 - Cold Test (After Durability) | -253C for 96 hours, then normal condition for 60 min | Electrical characteristics shall be satisfied | C / hours |
| 5 - Salt Spray Test (After Durability) | 5% NaCl liquor for 24 hours, then normal condition for 30 min | Without excessive corrosion or crack in appearance | hours |
