| Function | MDR board mount receptacle, right angle |
| Contact Pitch | 1.27mm (2 rows) |
| Contact Tail Arrangement | 1.27mm x 1.905mm staggered grid |
| Compatible Connectors | 3M BRAND MDR PLUG: 101XX-XXXX XX |
| Compatible PC Boards | PCB with solder plating hole (recommended hole pattern in RELATED SPECIFICATION DRAWINGS) |
| PCB Thickness (Tail) | 3.9 mm (Max. 2.8 mm), 2.8 mm (Max. 1.6 mm), 2.3 mm (Max. 1.2 mm) |
| PCB Retention Method | SCREW LOCK ( 2.8 mm), GROUND LOCK TYPE1 ( 2.6 mm), GROUND LOCK TYPE2 ( 2.8 mm), GROUND LOCK TYPE3 ( 2.8 mm or 2.6 mm) |
| Ground Lock Hole Diameter | Type 1: 1.6mm, Type 2: 0.6 mm or 1.2 mm, Type 3: 0.6 mm Min. 1.6mm Max |
| Compatible Panels Thickness | 2.0 mm Max. (Including washers) |
| Related Specification Drawings | JNPD-O813 |
| Related Test Standards | MIL-STD-202, JEIDA-38-1984, JIS C 0050, JNTM-0039, JNTM-0040 |
| Product Number Information - Plating Thickness Suffix | PL: Under Nickel, Contact Area Gold 0.2 m Min., Tail Area Gold Flash w/ Lubricant
PE: Under Nickel, Contact Area Gold 0.5 m Min., Tail Area Gold Flash w/ Lubricant
PC: Under Nickel, Contact Area Gold 0.76 m Min., Tail Area Gold Flash |
| Product Number Information - Solder Tail Length | 2: 3.9mm, 3: 2.8mm, 4: 2.3mm |
| Product Number Information - Retention Feature | 0: Lock Stand (M2.6mm) for Panel & Screw Lock (M2.6) for PC Board
1: Lock Stand (M2.5mm) for Panel & Screw Lock (M2.5) for PC Board
4: Lock Stand (No.4-40) for Panel & Screw Lock (No.4-40) for PC Board
A: Lock Stand (M2.6mm) for Panel & Ground Lock Type 1 for PC Board
B: Lock Stand (M2.5mm) for Panel & Ground Lock Type 1 for PC Board
D: Lock Stand (M2.6mm) for Panel & Ground Lock Type 2 for PC Board
E: Lock Stand (No.4-40) for Panel & Ground Lock Type 1 for PC Board
F: Lock Stand (M2.6mm) for Panel & Ground Lock Type 3 for PC Board
G: Lock Stand (M2.5mm) for Panel & Ground Lock Type 3 for PC Board
H: Lock Stand (No.4-40) for Panel & Ground Lock Type 3 for PC Board |
| Product Number Information - Type | 2: Standard Body |
| Product Number Information - Pin Configurations | 5: Board Mount Right Angle Type |
| Product Number Information - Contact Quantity | XX Pos. (Exception: 100 pos. is shown II AO) |
| Product Series Name | 102: MDR Receptacle |
| Quality Performance - Dielectric Withstanding Voltage | AC 500V rms (between adjacent contacts for 1 minute), No arcing/breakdown, Leak current: 1mA Max. |
| Quality Performance - Insulation Resistance | 500M Min. (DC 500V between adjacent contacts for 1 minute) |
| Quality Performance - Discontinuity | Less than 1s (Vibration test, Mechanical shock test) |
| Quality Performance - Contact Resistance (Initial) | 30m Max. (Measured at Short Circuit: Current 1.5mA, Open Circuit Voltage 20mV by 4 terminal method. Includes resistance of conductive material.) |
| Quality Performance - Contact Resistance Change | 25m Max. (After evaluation tests) |
| Quality Performance - Durability | PL: 300 cycles, PE & PC: 500 cycles |
| Plating Spec Indication on Connector | First letter of stamped 3 letters for lot numbering: 'R' for PL plating, '.2' for PE plating, 'y' for PC plating |
| Package | Plastic tray and carton box |
| Storage Conditions | Ambient temperature 5-35C, Ambient humidity 40-70% |
| Attentions - Fixing of Connector | Should be fixed on panel by screws. |
