| Sign In | Join Free | My benadorassociates.com |
|
Description : USB-C (USB TYPE-C) Receptacle Connector 24 Position Surface Mount, Right Angle
Current Rating : 3A
Voltage Rating : 30V
MOQ : 1000
Number of Contacts : 24P
Mounting Type : Surface Mount, Right Angle
Operating Temperature : -20℃~+60℃
Brand Name : USB-306K
Number of Ports : 1
Packaging Details : SMD
Connector Type : Type-C
Stock : 10000
Gender : Female
Model Number : USB-306K
Delivery Time : 5-6周
Detection color : Black
This document outlines the specifications for USB connectors, focusing on electrical performance, environmental performance, and mechanical performance. It details test methods and specifications to ensure product reliability and functionality in various conditions.
| Item | Description | Test Methods | Test Specification |
|---|---|---|---|
| 7-1 Insulation Resistance | Unmated connectors, apply 100Volts DC between adjacent terminals or shell ground. | EIA 364-21C | 100M minimum (unmated) between adjacent contacts and contacts and ground. |
| 7-2 Low Level Contact Resistance | 100mA max., 20mV Max. open circuit at 100mA Max. | EIA 364-23b | 40m(Max) initial for VBUS and GND contacts and all other contacts; delta 10m(Max) after test. |
| 7-3 Dielectric Withstanding Voltage | Subjected to 100VAC (RMS) for 1 minute between adjacent terminals. | EIA 364-20 | There shall be no breakdown. |
| 7-4 Contact current rating | 5.0A shall be applied collectively to VBUS pins and 1.25 A applied to the VCONN pin and 0.25 A the other contacts. When the currents are applied to the contacts, the temperature rise shall not exceed 30 C at any point on the USB Type-C mated plug and receptacle under test, when measured at an ambient temperature of 25 C. | EIA364-70 | 5.0A (VBUS), 1.25A (VCONN), 0.25A (other contacts) with max 30C temperature rise. |
| Item | Description | Test Methods | Test Specification |
|---|---|---|---|
| 8-1 Temperature Life | 105 C without applied voltage for 120 hours. 105 C without applied voltage for 72 hours when used as preconditioning in EIA 364-1000.01. Visual inspection, Test shall be done in sequences defined in EIA 364-1000.01. | EIA 364-17 | 105C for 120 hours (standard), 72 hours (preconditioning). |
| 8-2 Thermal Shock | 10 Cycles -55C and +85C. The USB 3.0 connectors under test must be mated. There shall be no evidence of any physical damage. | EIA 364-32 | -55C to +85C for 10 cycles. No physical damage. |
| 8-3 Salt Spray | Subject mated connectors to 48 hours at 35C with 5%-Salt-solution concentration. | MIL-STD-202F, Method 101D, Test Condition B | 48 hours at 35C, 5% salt solution. Shall meet visual requirements and no physical damage. |
| Item | Description | Test Methods | Test Specification |
|---|---|---|---|
| 5-1 Examination of Product Appearance | Outward appearance shall be good without such injurious problem and structure shall be meet the design and dimension requirement of drawing. | EIA364-18 | Visual inspection against drawing. |
| 6-1 Insertion force | Measure force at maximum rate of 12.5mm (0.492") per minute. | EIA 364-13 | 5N to 20N. |
| 6-2 Extraction force | Measure force at maximum rate of 12.5mm (0.492") per minute. | EIA 364-13 | 8N to 20N. |
| 6-3 Durability | 10000 cycles. | EIA 364-09 | Contact resistance: 40m max. initial, 10m max. after test. Insertion/Extraction force: 5-20N / 8-20N. |
|
|
HOOYA USB-306K Images |