| Sign In | Join Free | My benadorassociates.com |
|
TDK IEC inlet filters are designed for use in low-voltage networks. These components are intended for professional applications and must be installed by qualified electricity specialists. The filters require adherence to strict safety protocols regarding leakage currents, protective earth connections, and thermal management to prevent electric shock, fire hazards, or equipment damage.
| Topic | Instruction Summary | Reference Chapter |
|---|---|---|
| Selecting a filter | Observe rated input current, voltage, and harmonic content; check derating instructions. | 9, 10 |
| Residual Voltages | Active parts must discharge to <60 V within 5 s. | 6.2 |
| Installation | Ensure voltage-free state per EN 50110-1; PE connection must be made first and disconnected last. | 6.4 |
| IT Systems | Special attention required for "first fault" and other fault cases. | 7.6 |
| Leakage Currents | Limits must be observed based on equipment standards; specific PE cross-section requirements apply for currents >3.5 mA. | 8.4, 8.6 |
| Voltage Derating | Exceeding higher-frequency voltage limits may cause damage. | 9.8 |
| Current Derating | Non-observance at elevated temperatures may cause overheating and fire hazards. | 10.1 |
|
|
TDK B84773M0006A000 Images |
Friendly Links: www.everychina.com
Home| Products| Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们
Thank you! Your message has been sent to the following suppliers.
